Vizio Soundbar Universal Remote Codes & Program Instructions

Vizio Soundbar Universal Remote Codes

Do you need vizio soundbar universal remote codes? Read this! If you own the soundbar from vizio (VB) that you want to control, and prefer to control it using your favourite universal remote control, or your cable or SAT remote we have the codes you require.

If you have the right remote codes as well as the proper programming guide, then this VB can be controlled using any of your preferred universal remotes.

Vizio Sound Bar 5 Digit Universal Remote Codes:

  • 1009
  • 31517
  • 32454
  • 31975
  • 11144

Vizio Sound Bar 4 Digit Universal Remote Codes:

  • 1517
  • 0660
  • 0883

Xfinity Remote Code Vizio Sound Bar

  • 11758
  • 11756
  • 10864
  • 10885
  • 10178

Some other codes that work with VB can be VSB200 as well as SB3820, VSB201, VHT215, S3821. We’ve examined the codes using Comcast remote control, Verizon Fios, Xfinity X5 remote, Uverse, U-Verse, S10-S3,S10-S4, Atlas 1056B03, etc.

The next step is to program your preferred remote so that you can pair it with your soundbar. Find the most effective ways below on how programme your device to connect to your soundbar.

Notice: Some soundbars have been programmed to use the different IR to manage them. Also, put to the volume control of your TV IR into the Vizio SB.

How to Program Vizio Soundbar Universal Remote Without Codes

With the auto-search method, all universal remote codes go by scanning the remote. It scans each code one at a time , figuring the right remote code that is compatible with the remote to programme the control. Follow the below instructions:

  1. “Switch On” the smart device similar to “TV” that you would like the universal remote to use.
  2. “Turn on” the remote, then press the button on the device (TV DVD CBL, OK/SEL) for 3 seconds. The LED light will indicate that the device is now ready to be programmed.
  3. Connect the remote to the device and then click on “CH+” and “CH-“ switches. Remote will show off and on signals. Press the “up” or “down” key repeatedly until the device will be turned off.
  4. Verify the code by pressing on the “power” key. The device will start to turn on. If it does trying to change the channel, you can try switching it to confirm that the remote has been properly programmed.
  5. Tap on the “device” button to save the code. The LED on the device will flash twice to confirm that the code has been is saved.

How to Program Vizio Soundbar Universal Remote With Manual Method

Utilizing the keycode, you can easily programme a universal remote. the keycode will identify the manufacturer and model of the equipment.

  • You must first “Turn The Device On”
  • Click “TV” on your “Vizio Soundbar universal remote”
  • Then press then hold down your “Setup button” of the Universal Remote until it displays”Light Flash” “Light Flash” (It signifies that it’s”Learning mode”) “Learning mode”)
  • Enter your “Keycode” which you got from the programming instruction manual (Instructions Booklet)
  • Once you’ve completed the procedure After that, simply “point your remote at the TV” and then press the “Press And Hold The Power”button
  • You can press”Power Button” or “Power Button” when the screen turns off.

The television will now function perfectly using an universal remote. However, If your device isn’t working , try repeating this process with different code that is in the same section of the table referenced.

How to Program Vizio Soundbar Universal Remote With Code Search

If you can’t locate the key code on the device at the time , you can change your universal remote in search mode to find the right one. This is a manual code that forces the remote to enter the search mode.

  • First of all “Turn The Device On”
  • Then press on and hold”Setup.” “Setup” button
  • Input your “9-9-1” (three numbers) code
  • Then press on the “Power Button” on the remote, and then push the Channel up until the device on your TV “Turns Off”

This method may take more time, however it is crucial to identify your code. After you’ve completed the steps above, your remote should work with all functions.

We are hoping that the methods described above as well as the codes are used to programme for your Vizio Soundbar and also for your preferred remote control. These methods are employed to set up the Vizio Soundbar remote controls configuration.

We’ll now discuss other methods to fix certain issues. Make sure to check them out.

Verizon Fios Key Fix

If you’ve programmed your remote control flawlessly however some keys such as VOLor Mute as well as the keys for A/V aren’t working , then you must follow the following key fix method for a solve the issue.

  • Simply, Press & Hold “OK”and “*”simultaneously. Then, the RED LED will blink twice following the initial blink, but it remains lit.
  • Then, press and hold to indicate that it is “Not Working” correctly. Therefore, the remote control will attempt to use different codes every one second.
  • You are able to “Release The Key” anytime you are sure that the “TV Responds Correctly”
  • After that, press “OK” then it will save your current settings immediately.

However remote codes may not be compatible with the settings like the cable tv remote or the satellite TV remote. You must then programme the device that is not supported by creating each key separately for the purpose of sending an encoded code.

This means that every button or remote’s key needs to be programmed for the remote, and then it will function. Every remote function functions by sending a code to your sound bar.

Vizio Soundbar And U verse Remote Control Fix

  • With”1009″ code “1009 code” you can program the soundbar of the vizio with the “TV” Key on the U verse remote.
  • Make use of to use the “Manual Code” or the “Auto Scan Mode” to program your television using “DVD Key” on the remote “DVD Key” on the remote.
  • It is necessary to press the “Volume to TV Button” for this , just “Press ATT” and then “Press OK” after that “Enter 955” and then “Press TV” button
  • Imagine that you need to “Power Off” all at one time, you must “Press ATT” and then “OK” buttons, release the keys, type in 977, hit “ATT” and then press “DVD” and “TV” buttons, and finally press the “Enter” button.

Conclusion:

If the above-mentioned codes are not working for you please leave a comment with the model number of your remote and the model number of your soundbar. We will then be able to identify the right codes or the proper programming method.

Leave a Comment