Downalod Samsung SM-J200G Stock Firmware ROM (Flash File)

Downalod Samsung SM-J200G Stock Firmware ROM (Flash File)

Samsung SM-J200G Stock Firmware ROM (Flash File)

Here we are sharing the stock rom flash file with you to flash Samsung SM-J200G phone. You phone might be facing some software related issue, so fix them, you can use samsung j200g/dd flash file latest version 2019. Latest version will keep your mobile up to date.  The file we are sharing here includes samsung j200g/dd flash file, Flash Tool, and USB driver.

Download Samsung SM-J200G Stock Firmware ROM (Flash File)

You are getting the official stock rom for Samsung SM-J200G phone. It helps upgrading, downgrading or removing stock rom on your mobile. It resolves the software related issues like bootloop, hang on logo, network issues, etc.

Samsung j200g/dd flash file

How to Flash Samsung Galaxy SM-J200G/DD by Odin

In this tutorial, we will be talking about the how to flash Samsung Galaxy SM J200/DD by Odin tool. It is one of the simplest method to install stock rom on Samsung j200g phone. You just need to follow the given instructions on your windows PC.

Step-1 Download & install Samsung drivers on your pc so the computer can detect your device (If you already done so, please skip this step).

Step-2  Extract the downloaded stock rom file on your pc.

Step-3 Switch off your Samsung device.

Step-4 Now you have to put your phone into download mode. To do so, press and hold Volume down button, home button and power button altogether. Leave the power button once the mobile vibrates, but keep holding home and volume down button. Your mobile will be into download mode.

Step-5 In the download mode, you will be seeing a yellow triangle symbol. To continue from here, press volume up button.

Step-6  Download Odin tool and extract it on your pc.

Step-7 Run Odin3 exe file from the extracted Odin folder and connect your phone to pc using USB cable.

Step-8 after connecting your phone with pc, the ODIN tool will automatically show your device with Added message.

Step-9 Once the device is detected, click on AP button and select the tar.md5 file from the extracted firmware rom folder.

Step-10 Now click on start button to begin the flashing process.

Step-11 At the end of flashing, you will see Green Pass Message on the screen.

Step-12 After it, your mobile will stop at boot loop. To resolve it, you have to boot into Stock recovery mode. To enable this mode- press & hold Volume up, home button, and power button. Once the phone vibrates, leave the power key and keep holding volume up and home key. Your phone will boot into the recovery mode.

Step-13 In recovery mode, select wipe data/factory reset.

Step-14 Once cache data is cleared. Restart phone from the recovery mode.

Step-15 Now the phone will restart without any problem and you can run phone on newsly installed stock rom.

Leave a Comment